Precautions And Limitations - Xerox DocuPrint C1618 User Manual

Precautions and
Limitations
Precautions and Limitations Relating to the Printer
Item
Sound of movement
Paper wrinkles are generated
when printing documents having
high image density in two-sided
mode.
Poor storing heavy weight paper
on the exit tray.
Notes About Printing
Item
A document's on-screen
appearance and printout are not
the same.
Thin lines don't print
Thin lines are printed with
different colors.
Dotted lines are printed
Shaded areas are printed with
different colors.
Patterns disappear.
Patterns are printed with
different colors.
Shaded areas are marred with
printed.
There are color variations in the
same object.
Printed with completely different
colors that the specified graphic
(blues are yellow, light blues are
red, there are blanks, etc.).
The sound of movement is pronounced when this printer is installed
next to desks.
Consider the surroundings when setting up the printer.
When printing documents containing highly dense images to both
sides of the paper, wrinkles can be generated, depending upon the
type of paper you use.
Print to thicker paper (such as Fuji Xerox JD paper, etc.).
Depending on the type of paper, it may curl a great deal when fixing
the image. For that reason paper may not be stored properly in the
exit tray.
Use paper with a weight of less than 160 g/m
In some applications and document types, carriage returns and
pages are inserted in unintended positions. To print documents as
they appear on screen, set High Quality in Image Types in the
Graphics tab (Windows) in the printer driver.
Print with one of the following methods: This may result in correct
printing.
Make thin lines thicker.
q
q Specify a darker color.
q Do not use yellow lines (particularly on a white background) if
possible. It is recommended that you use a different color.
q Select the Complementary Color Conversion check box with the
Detailed Settings (for Windows) in the printer driver Graphics tab.
Make the following settings with the printer driver to print. This may
print correctly.
q Set Image Types to Transparencies in the Graphics tab
(Windows).
Select the Complementary Color Conversion check box with the
q
Detailed Settings in the Graphics tab (for Windows).
Depending on the application program you use, one object may be
separated into several and graphics in some locations may be sent
to the printer as an image for a different location.
Because this printer converts to the appropriate colors according to
each graphic and image, color levels occur according to the
differences in the results.
This symptom occurs when set to Super Fine in Image Types in the
Graphics tab (Windows) in the printer driver.
Set the Strict Raster Operation to On with the Graphics tab (for
Windows).
Explanation
2
.
Explanation
231