Physical Connection - Xerox WorkCentre 6400S System Administrator Manual
Color multifunction printer
Hide thumbs
Also See for WorkCentre 6400S:
- Quick use manual (17 pages) ,
- Quick manual (8 pages) ,
- Specifications (8 pages)
Table of Contents
Advertisement
Initial Setup
Physical Connection
To connect your printer:
1.
Connect the power cable to the printer, and plug it into an electrical outlet.
2.
Connect one end of a Category 5 or better Ethernet cable to the Ethernet port in the back of the
printer. Connect the other end of the cable to a correctly configured network port.
3.
If your printer has fax installed, connect it to a correctly configured telephone line.
4.
Turn the printer on.
14
WorkCentre 6400 Multifunction Printer
System Administrator Guide
Advertisement
Table of Contents
Troubleshooting
