Xerox WorkCentre 6400S System Administrator Manual page 26

Network Configuration
DNS Configuration for IPv6
Type an IP address for the Preferred DNS Server, Alternate DNS Server 1, and Alternate DNS
1.
Server 2.
Select Prefer IPv6 DNS severs over IPv4 if you want to use IPv6 addresses.
2.
Note: There is no support for IPv6 DDNS. The printer directs the DHCPv6 server to update DNS.
Manual Address Options
1. Select Enable Manual Address to enable Router Prefix attachment.
2. Select a router address prefix from the Router Prefix drop-down menu to populate the prefix for
manual address entry.
Note: The Router Prefix is derived from router advertisements.
3. Click Add.
Note: Xerox recommends that you add one manual IPv6 address by choosing from the list of
router-supplied prefixes, however you can also supply your own prefix.
4. Click Apply.
26 WorkCentre 6400 Multifunction Printer
System Administrator Guide