Xerox WorkCentre 6400S System Administrator Manual page 40

Network Configuration
To verify a users access to either role, type the user's name in the Enter User Name field, then click
4.
Test.
The Test Results column displays the users name if the user is a member of the LDAP group or No
Access if they are not a member.
5. Click Apply.
Service Access Setup
Note: Service Access setup requires that Authentication is enabled and Tools and Feature Access
are configured to require users to log in before they can access services. For detail on these topics,
see Setting up Access Rights
You can specify access to the services of the printer under Service Access. Type the names of the LDAP
groups for any of the services listed.
1. On the Authorization Access page, click the Service Access tab.
2. Under Access Group, type the names of the LDAP groups allowed to access each of the individual
printer services.
3. To verify a users access to either role, type the user's name in thanker User Name field, then click
Test.
The Test Results column displays the users name if the user is a member of the LDAP group or No
Access if they are not a member.
4. Click Apply.
Feature Access Setup
Note: Feature Access setup requires that Authentication is enabled and Tools and Feature Access
are configured to require users to log in before they can access features. For detail on these topics,
see Setting up Access Rights
You can set specific access to the color copying feature of the printer listed on the Feature Access page.
On the Authorization Access page, click the Feature Access tab.
1.
Under Access Group, type the names of the LDAP groups allowed to access each individual
2.
feature.
To verify a users access to either role, type the user's name in thanker User Name field, then click
3.
Test.
The Test Results column displays the users name if the user is a member of the LDAP group or No
Access if they are not a member
4. Click Apply.
40 WorkCentre 6400 Multifunction Printer
System Administrator Guide
on page 54 and Controlling Access to Tools and Features
on page 54 and Controlling Access to Tools and Features
on page 61.
on page 61.