Machine Status Button - Xerox Document Centre 220 User Manual

Machine Status button

À
Press the Machine Status
button to access the features
available.
À
To exit Machine Status , press
either the Job Status or
Features button at any time.
Page 2-28
Displays information about the Document Centre
220/230/332/340 . Press this button to confirm the paper
supply, review the status of faults and find information
required for service calls.
Machine Status cannot be accessed during a
NOTE:
system fault, when the confirmation window is displayed, or
when the Key Operator Tools is accessed on the touch
screen.
Machine Status information is grouped on four screens.
- Machine Information— displays the Customer
Support Number, machine serial number, and software
levels.
- Paper Supply Status— displays the status of each
paper tray, the bypass tray and the optional high
capacity feeder. It also displays the size, type, and color
of the media in each tray and whether or not fax printing
is enabled for each tray (if fax is installed). The Key
Operator sets the defaults and enables specific paper
for printing fax documents.
Introduction