Data Coupler Information - Xerox Document Centre 220 User Manual

WARNING
Xerox Document Centre 220/230/332/340 User Guide

Data Coupler Information

This Xerox Document Centre 220/230/332/340 machine
contains an internal data coupler. Its use is restricted by the
FCC (Federal Communications Commission). To comply
with the FCC rules, you must carefully read and follow the
instructions listed below.
This equipment complies with Part 68 of the FCC rules. On
the rear of this equipment is a label that contains, among
other information, the FCC registration number and Ringer
Equivalence Number (REN). If requested, provide this
information to your telephone company.
The REN is useful to determine the quantity of devices you
may connect to your telephone line and still have all of those
devices ring when your number is called. In most, but not all
areas, the sum of the RENs of all devices should not exceed
five (5.0). To be certain of the number of devices you may
connect to your line, as determined by the REN, you should
call your local telephone company to determine the
maximum REN for your calling area.
Ask your local telephone company for the modular jack type
installed on your line. Connecting this machine to an
unauthorized jack can severely damage telephone
company equipment. You, not Xerox, assume all
responsibility and/or liability for any damage caused by the
connection of this machine to an unauthorized jack.
You may safely connect the machine to the following
standard modular jack: USOC RJ-11C. Use the standard
line cord (with modular plugs) provided with the installation
kit to connect it.
An FCC compliant telephone cord and modular plug is
provided with this equipment. This equipment is designed to
be connected to the telephone network or premises wiring
Page 1-7