Xerox Document Centre 220 User Manual page 106

Transparency options
Off the feature is not available.
Blank Dividers places a blank sheet of paper between each transparency.
No Dividers prints transparencies with no dividers, but Copy Sets can still
be selected.
Printed Dividers places a sheet of paper after each transparency and prints
the same image as the transparency it follows.
Copy Sets prints paper sets of the transparencies. Often, users
distribute paper sets of their transparencies to participants at
meetings. After selecting Copy Sets, enter the number of
sets from the keypad on the control panel.
HINT: If a paper tray has been loaded and the tray attributes
have been programmed it is not necessary to assign a tray
for transparencies. When selecting Transparencies from the
touch screen, the Document Centre 220/230/332/340
automatically detects the tray that contains the
transparencies.
NOTE: Do not copy onto transparencies without selecting
Transparencies from the Output Format touch screen. This
way, the machine can adjust its settings and avoid
overheated or distorted transparencies.
For more information about loading transparency stock
please refer to Page 8-22.
Page 3-42 Copy