Paper Supply - Xerox Document Centre 220 User Manual

Paper Supply

Xerox Document Centre 220/230/332/340 User Guide
For non-standard sizes, use the scroll buttons to
choose a specific enlargement or reduction in 1%
increments.
HINT: To save time use the pop-up keypad on the touch
screen instead of the scroll buttons to insert values. Touch
the display box for the size selections (the small rectangle
to the left of the scroll buttons) and a keypad will be
displayed. Enter the values and press Save.
- Custom
used to reduce or enlarge a document in non-equal
proportions. Again, 100% and Auto are available to reset the
magnification after using a custom setting.
HINT: When Custom Reduce/Enlarge is selected, the
machine does not rotate the image to match the orientation
of the documents. If Auto Custom Reduce/Enlarge is
selected, the machine does rotate the image.
The media loaded in the paper trays determines the sizes
displayed in the Paper Supply selection on the touch screen.
For example, if transparencies are loaded, a picture of a
transparency is displayed.
When a tray is opened or paper is loaded in to the Bypass
Tray a pop-up window 'Tray Attributes' will be displayed on
the touch screen. When changing the type or color of stock
in the tray then the tray must be programmed to match the
media being loaded. If the type or color of stock is not being
changed, touch Confirm to close the window.
NOTE: For information about loading paper, refer to "Paper
and other media" on Page 8-1 .
Page 3-21