Job Assembly; Build Job - Xerox Document Centre 220 User Manual

Job Assembly

À
Touch the Added Features
tab.
À
Touch the Job Assembly tab.

Build Job

Xerox Document Centre 220/230/332/340 User Guide
Use the productivity features available in the Job Assembly
tab to program a job. For more information about the
features available refer to the following:
Build Job - Page 3-55
Stored Jobs - Page 3-57
Use this feature to build a job that requires different settings
for each page. If a set of documents consists of some pages
with text and some with photos, you can select appropriate
settings for each but end up with one complete job. By
default, Build Job is set to Off.
HINT: After the Build Job Screen is displayed, use it rather
than the control panel to program each page.
Page 3-55