Covers (Document Centre 332/340) - Xerox Document Centre 220 User Manual

À
Load the documents in the
Document Feeder (long edge
feed and in order with the first
page on top).
À
Touch Booklet Creation in the
Output Format tab.
À
Touch On .
À
Enter the quantity required
and press Start .
Covers ( Document Centre 332/340 )
À
Load the cover stock into the
required paper tray.
À
The Change Attributes
window will be displayed,
program the new paper stock
and touch Save .
À
Select the features required.
À
Touch the Added Features
tab and then the Output
Format tab.
À
Touch the Covers option.
Page 3-52
NOTE: If the document is 8 1/2" x 11" and 11" x 17" paper is
selected as the output, the Document Centre
220/230/332/340 prints the booklet at 100%. If a paper size
is not selected, the machine defaults to the same size paper
as the document. In this case, it reduces the images to fit
two pages, landscape orientation, on each page.
This feature enables paper and card covers to be added to a
copy job. Use the following steps to add covers to a job.
Copy