À
Using the numeric keypad,
enter the fax number.
If a character is normally dialed
before the telephone number, for
example 9 for an outside line, a
pause will need to entered after this
character - press the Dial Pause
button on the control panel before
continuing to enter the fax number.
NOTE: Dial Pause is displayed
as a dash. If using manual
dialing, the Dial Pause
character is not required;
instead wait for the outside line
dial tone before proceeding
À
Press Start.
The Fax Job Monitor pop-up
window will be displayed. This
shows information about the fax
job.
The Document Centre scans
the images and places them in
its memory.
Xerox Document Centre 220/230/332/340 User Guide
3. Dial the number
Dial Pause button
4. Press Start
Page 4-5