Table of Contents
Advertisement
1 Basic Operation and Function List
1.1 Usage of Switches and Operation Guide
1. Touch any switch (except
The operation guide appears on the screen.
Display
2. Touch a switch for the icon showing the item you want to set.
The menu appears.
3. Use each switch to configure the setting. If necessary, select
4. Select
to exit the menu.
Note
• The menu and operation guide will automatically disappear after a few seconds if no switches
are operated.
).
Turns the power on or off.
Displays the Setting menu. The Setting menu is used to configure advanced
monitor settings.
Switches PCs used to operate USB devices. For more information about how to
switch display modes, see
Attention
• The operation guide does not display this item by default. See
Icon for Switching the USB Ports in the Operation Guide [} 18]
information on how to display.
Switches display modes. For more information about how to switch display
modes, see
Selecting Display Mode (CAL Switch Mode)
Selects an item.
Applies the selected content.
Cancels the selection.
Basic Operation and Function List | 1
Function
Switching PCs Used to Operate USB Devices
[} 18].
Showing the
for
[} 9].
to apply the setting.
5
Advertisement
Table of Contents
