Operation; Operator Controls - Eizo CuratOR LX1910 Instructions For Use Manual

7 Operation

Once installed, user operation of the monitor consists of switching the power on and off.
After switching on the monitor, the operation LED is lit green continuously. If the LED lights
up with another color, the monitor is not operating within normal operation.
Measures in the event of a failure
Note
Device malfunction in operation
If the device is not working properly, check the system for basic connection and operating
errors before contacting service personnel.

7.1 Operator controls

NOTICE
OSD operation by service personnel only
The following sections describe the operating elements and the OSD menu. The descrip-
tion is directed exclusively to service personnel.
The OSD keys and the operation LED are located on the front of the monitor.
The operation LED illuminates when power is supplied to the device and the power switch is
turned on.
CuratOR LX1910
Instructions for Use, 08/2022
Power switch
(at the back)
1 2 3
7.1 Operator controls
4 5 6 7 Standby
Operation
Operation LED
23