Resettingthe Password - Pioneer PDP-5040HD Operating Instructions Manual

÷
Usefum Adjustment Settings
Resetting the password
1 Press HOME MENU,
2 Press ÷/41, to seUect "Setup", and then press
ENTER.
3 Press ÷/÷ to seUect "Password", and then press
ENTER,
, The password entry screen appears, Enter your
4-digit password ush_g buttons e - 9,
4 Press ÷/+ to seUect "Reset", and then press
ENTER,
OSD
÷
5 Press ÷/41, to seUect "Yes", and then press ENTER.
6 Press HOME MENU to exit the menu.
NOTE
The above procedure will reset the password to the
÷
En
Cut along the dotted line and file after reading and filling out.
mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm
[]
[] We suggested
you write down your password so you don't forget it.
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
PDP5040HD-Eng (81-96)
} } }
] D]-5040HD/] DP-4340HD
Your password No.:
UUUU
_f yo_ forget the password
When the message "Please Input Your Password" is
displayed in step 3 above, press the ENTER button on the
remote control unit and hold it down for 3 seconds or
longer,
The password reverts to "1234".
96
÷
7/24/03, 2:01PM