Setting For Skipping Unwanted Channels; Checking Signal Strength - Pioneer PDP-5040HD Operating Instructions Manual

÷
(/Basic Adjustment Settings
÷
$ettin 9 for skipping unwanted channems
From among digital TV channels searched and set up
using Auto Channel Preset, you can select channels to
be skipped when CH +/= are operated.
t Press HOME MENU.
2 Press +/4, to seUect "DTV Setup", and then press
ENTER,
3 Press÷/4, to select "DTV Channel Setup", and
tl_en press ENTER.
4 Press ÷/4, to select "Cl_annel Add/Del', and tl_en
press ENTER.
5 Press ÷/4, to select "Cl_annel'.
6 Press ÷/-_ to select a cl_annel to be skipped.
QSD
7 Press ÷/4, to select "Add/Delete'.
8 Press ÷/-I, to select "Delete'.
ChecMng signa_ strength
When watching a digital TV program, you can check its
current signal strength.
I Press HOME MENU.
2 Press ÷/_1,to select "DTV Setup", and then press
ENTER.
3 Press ÷/_, to select "DTV Channel Setup", and
then press ENTER,
4 Press ÷/_1,to select "Signal Strengtl_', and tl_en
OS
o Adjust the direction of the antenna so that the
current signal strength reaches as close to the
maximum signal strength as possible.
Press HOME MENU to exit the menu.
_iiiiiii_ii_i;i1_iiiiiiiiii1iii_iii_ ¸,
m
÷
OS
9 Press HOME MENU to exit the menu.
_'_ NOTE
, 'It restore skipped channels, use the abow_ procedure
except that you select "Add" in step 8.
ER
PDP5040HD-Eng (40-55) 45 _ 7/24/03,1:59 PM