Freezingimages - Pioneer PDP-5040HD Operating Instructions Manual

÷
Basic Operations
÷
t Press SPLIT to seUect the dispUay mode.
* Each time you press SPLIT, the dispUay mode is
switched among 2-screen, picture-in-picture,
and singUe-screen.
2 When in the 2-screen or pbture-in@icture mode,
press ÷/-_ to seUect a screen to be active,
. " .b" appears on the active screen, which
outputs sound,
3 To seUect the desired input source, press the
appropriate input source button,
* If watching TV programs, press CN +/= to
clmange timeclmannel.
_'_ NOTE
* The multiscreen function cannot display images from
the same input source at the same time, If you make
such an attempt, a warning message appears,
o When you press HOME IVlENU, DTV GUIDE, or
DTV INFO, the single-screen mode is restored and
the corresponding menu is displayed,
Freezing images
Use the following procedure to capture and freeze one
frame from a rnoving image that you are watching,
@iiiiiBiiiiiiiWi_i ¸,
m
÷
t Press FREEZE.
* A still image appears on timeriglmt screen wlmile a
moving image is slmown on time left screen,
2 Press FREEZE again to cancel timefunction,
NOTE
* With the screen split, any image cannot be frozen,
* When this function is not available, a warning mes-
sage appears,
En
PDP5040HD-Eng (28-37) 37 _ 7/24/03,1:58 PM