Setting Up Digital; Using Auto Channel Preset - Pioneer PDP-5040HD Operating Instructions Manual

÷
Basic Adjustment Settings
÷
Setting up digitaU TV channeUs
Tills section describes hew to search and set up
digital TV channels that you can watch under the
current conditions. Unless you set up digital TV
channels using Auto Channel Preset, you cannot
tune in those channels.
Using Auto Channel Preset
Auto Channel Preset automatically searches and
sets up digital TV channels.
I Press HOME MENU,
2 Press ÷/,1, to select "DTV Setup", and then
3 Press ÷/_1, to select "DTV Channel Setup",
and then press ENTER.
4 Press +/41, to select "Auto Channel Preset",
and then press ENTER.
5 Press ÷/-I, to select "Air" or "Cable".
OSD
6 Press +/4, to select "Start", and then press
ENTER.
o Channel search automatically starts.
7 Press HOME
MENU
to exit the menu.
NOTE
With "Cable" selected, this system can receive only
digital 'IV signals with the 8VSB modulation. This
system does not support the QAM modulatior_.
÷
PDP5040HD-Eng (40-55) 44 _ 7/24/03, 1:59 PM