Cable Control Buttons - Pioneer PDP-5040HD Operating Instructions Manual

÷
_UsefuJ Features
÷
®®®
@@
...... '_,3 .....
(i _} (Z}i}
Mode switch
(with "CB L/SAT"
selected)
CabJe contreJ buttons
When the Jlaode switch is set to CBL/SAT the cabb
converter connected to the display can be operated
usi no _1)to _),
Cable converters made by other manufacturers and not
preset can also be operated using the remote control
unit if _1)to _} have learned the functions, See page 97,
(be-9
Press a button (or buttons) that corresponds to
the channel that you want to watch,
@ CH +/-
PressCN + or CN -to tune in a higher or lower
cl_annel.
@ SOURCE (b
'furns the cable converter power on and off,
(47 CN ENTER *
Fix the selected channel with the direct channel
sebction buttons.
_} CN RETURN *
Press to switch between the current channel and
the channel you were watching immediately
before.
* Some manufacturers do not preset CN ENTER and
CN RETURN, Use these buttons to learn if neces-
sary,
NOTE
CABLE and SA-[ cannot be selected at the same time,
The color-higNighted buttons on the remote control
can learn the control signal from another device's
remote control,
@iiiBiiiiiiiWi_iWi_iWi_iW ¸,
m
÷
En
PDP5040HD-Eng (97-105} 101 _ 7/24/03, 2:01 PM