Password Setting For Child Lock (Av Mode Only) - Pioneer PDP-433HDE Operating Instructions Manual

Useful adjustment settings
0–9
MENU
ENTER
/
PDP-503HDE/(E)-e
MENU
Setup
Child Lock
Password
New Password – – – –
Reconfirm – – – –
MENU
Setup
Child Lock
Password Clear
No
Yes
54
Password setting for Child lock (AV
mode only)
Allows you to use a password to protect certain settings
from being accidentally changed.
Setting a password
1
Press MENU.
2
Press / to select "Setup", and then press
ENTER.
3
Press / to select "Child Lock", and then press
ENTER.
4
Press / to select "Password", and then press
ENTER.
5
Enter the 4-digit number as a password using 0 –
9.
6
Enter the same 4-digit number as in step 5 to
confirm.
• "New Password is registered." displays.
7
Press MENU to exit the menu.
A
• Return to the previous menu by pressing n.
• To view a locked channel (Lock setting in Programme
Setup "Manual" is set to "On"), you must enter a password.
(See page 29.) When you select a locked channel, a
password prompt message pops up. Press ENTER to
display the password input window.
Clearing the password
Allows you to clear your password.
1
Press MENU.
2
Press / to select "Setup", and then press
ENTER.
• Password input menu displays.
3
Enter your 4-digit password with 0 – 9, and then
press ENTER.
• Setup menu displays.
4
Press / to select "Child Lock", and then press
ENTER.
5
Press / to select "Password Clear", and then
press ENTER.
6
Press / to select "Yes", and the press ENTER.
• Your password is cleared.
7
Press MENU to exit the menu.
A
• Return to the previous menu by pressing n.
• As a precautionary measure, make a note of your
password and keep it in a familiar place. If you lose or
forget your password, initialise the Plasma Display
System to return all settings except for the TV channel
settings to factory preset values. (See page 63.)
8/31/02, 5:41 PM
54