Blocking Not Rated (Nr)Tv Programs - Pioneer PDP-5040HD Operating Instructions Manual

÷
(Usefum Adjustment Settings
Setting the voluntary moving rating sys=
tern (MPAA)
1 Press HOME MENU.
2 Press ÷/+ to seUect "Setup", and then press
ENTER.
3 Press ÷/,1, to seUect "Parental ControF, and then
press ENTER.
, Ufyou have set a password (page 95), the
password entry screen appears. Enter your 4-
digit password using buttons e - 9,
4 Press ÷/_1, to seUect "MPAA Ratings", and then
press ENTER,
5 Press ÷/4, to seUect the desired rating, and then
press ÷/+ to select "View" or "Block",
8mocking Not Rated (NR) TV programs
Use the following procedure to block movies not rated
by the MPAA.
I Press HOI_E IVIENU.
2 Press ÷/÷ to select "Setup", and tl_en press
ENTER,
3 Press ÷/,1, to select "Parental Control", and then
4
5
o If you I_ave set a password (page 95), time
password entry screen appears. Enter your 4-
digit password using buttons 0 - 9,
Press ÷/,1, to select "MPAA NR", and tl_en press
ENTER,
Press ÷/÷ to select "View" or "Block", and then
_iiiiiii_ii_i;i1_iiiiiiiiii1iii_iii_ ¸,
m
÷
OS
OSD
÷
The factor_z defaults for all the ratings are
"View",
6 Press HOME MENU to exit the menu,
The factory_ default is "View".
6 Press HOIVIE IVIENiJ to exit the menu.
ExampJe t:
Changing "R" from "Block" to "View" causes "View" to
be automatically selected also for "G", "PG", and "PG-
13".
Example 2:
Changing "R" from "View" to "Block" causes "Block" to
be automatically selected also for "NC-17" and "X".
ER
PDP5040HD-Eng (81-96) 91 _ 7/24/03, 2:01 PM