Presetting]-V Programs Using The Epg; Using Auto Channel Select - Pioneer PDP-5040HD Operating Instructions Manual

÷
(/E(ectroni¢ Program Guide (EPG} (for DTV On(y)
÷
Presetting TV programs using the EPG
Usin,q the EPG, you can easily preset digital T\/pre-
grams for watching later (auto channel select), record-
ing with a D-VHS recorder, or recording via a VCR
controller,
Using auto channe( semect
With the power to the system left on, this function
automatically selects the preset TV program when its
on-air time comes, Then you will not miss watching an
important TV program when you are enjoying another
TV program,
1
2
Press DTV G_J(DE.
o TimeEPG screen appears.
Press +/4. and ÷/€, to select a program to be
preset, and tiqen press ENTER.
Select a program not yet started.
A setup menu appears.
4 Press 4-/-i, to select "OK", and tiqen press ENTER.
. Time program is preset and timesci_edule table is
restored.
A blue square icon appears for time preset
program.
• A black icon appears for overlapped
presetttings.
5 Press DTV G_J(DE to exit time Program Guide.
Witiq timesystem switciqed on, a c(_annei switc(_
alarm message approximately 30 seconds before
execution and timec(_annei is switciqed a si_ort
time before timestart of time program.
NOTE
Auto channel select is not executed when the system
is in the standby mode,
Finish presetting operations one minute before the
start of the program', otherwise presettings may fail,
. For priorities about overlapped presettings, see
"Priority rules for overlapped presettings" on page 63,
@)i;iiBiiiiiiiWi_iWi_iWi_i ¸,
m
÷
3 Press ÷/-_ to select "Program View", and tiqen
press ENTER.
o A dialog box for confirmation appears.
OS
En
PDP504OHD-Eng (56-64) 59 _ 7/24/03, 2:00 PM