Installing The Media Receiververtically - Pioneer PDP-5040HD Operating Instructions Manual

Preparation
installing the Media Receiver vertically
You can use the accompanyh-_g stand to hqstall the
Media Receiver vertbally,
Installing the Media Receiver vertically
Insert the vertical hqstallation stand into the side of the
Media Receiver,
Right side
You can remove the shock absorbing pads.
Shock absorbing pad
.J
@iiiiiBiiiiiiiWi_iWi_iWi_iW
m
Keep the shock absorbing pads and sc_'ews,They are
required when you place the Media Receiver in the
horizontal position,
Secure the vertical installation stand with
screws.
P(ug the screw holes using the caps provided.
Vertical installation stand
_J"" sc[ews
_J_J_ll T Removethe separation sheet.
' _ Align with the
/ole and attach.
Screw hole cap
,_ CAUTUON
" When you have installed the Media Receiver
vertically, always use the accompanying stand.
Jf you place the unit directly on the floor the
cooling vents will be blocked which will result in
mechanical failure.
En
PDPS040HD-Eng (17-27) 19 7/24/03,1:58 PM