If You Forget Your V-Chip Password; Software Upgrade - Pioneer PDP-5016 Service Manual

If you forget your V-Chip Password

- Omnipotence V-Chip Password: 1234.
- Press MENU button.
- Press Up, Down and CH+, CH-buttons to highlight "V-Chip" Control.
- Press OK button to pop up "INPUT PASSWORD".
- Use the Number buttons (0~9) to enter the omnipotence Password 1234.
- Press Down to highlight "Password change" Control.
- Press OK button to confirm and will pop up "Password Change" item.
- Change to your familiar Password again.

Software upgrade

- Connect the RS-232C input jack to an external control device (such as a computer) and software upgrade.
Type of connector; D-Sub 9-pin male
No. Pin name
1 No connection
2 RXD (Receive data)
3 TXD (Transmit data)
4 DTR (DTE side ready)
5 GND
6 DSR (DCE side ready)
7 RTS (Ready to send)
8 CTS (Clear to send)
9 No Connection
RS-232C configurations
(Standard RS-232C cable)
PC
RXD 2
TXD 3
GND 5
DTR 4
DSR 6
RTS 7
CTS 8
D-Sub 9
7-wire configuration
PDP
3 TXD
2 RXD
5 GND
6 DSR
4 DTR
8 CTS
7 RTS
D-Sub 9
3-wire configuration
(Not standard)
PC
RXD 2
TXD 3
GND 5
DTR 4
DSR 6
RTS 7
CTS 8
D-Sub 9
1
5
9
6
PDP
TXD
3
RXD
2
GND
5
DTR
4
DSR
6
RTS
7
CTS
8
D-Sub 9