Sa] Control Buttons - Pioneer PDP-5040HD Operating Instructions Manual

÷
UsefuJ Features
÷
Gb ....... _LD"" G D
JSOURCE
Mode switch
(with "CBL/SAT"
selected)
SAT controJ buttons
When the SAT is preset by the learning function of the
remote control, the remote control unit buttons will
function as shown below.
When the Mode switch is set to CBL!SA-E satellite
broadcast tuners made by other manufacturers and
not preset can also be operated with the remote
control unit if 71}to _ have learned the functions. See
page 97.
be-9
Press a button {or buttons) that corresponds to
the channel that you wish to watch.
_ CH +/-
PressCH + or CH-to tune in a higher or lower
channel.
_ ENTER, ÷/÷/÷/-i,
ENTER: Press to activate the selected
function.
÷/÷/÷/÷: Press the button to select items on
the SAT GUIDE screen or SAT MENU
screen.
_4_SAT JNFO
When this button is pressed, information on
satellite broadcasting will appear.
Use this button to learn if necessary.
SOURCE (5
Turns the Satellite broadcast tuner power on and
off.
(6) CH ENTER
Fix the selected channel with the direct channel
selection buttons.
• Use this button to learn if necessary.
_?) SAT MENU
When this button is pressed, the satellite
broadcasting menu screen will appear.
(_ SAT GUIDE
When this button is pressed, the satellite
broadcasting guide screen will appear.
NOTE
CABLE and SAT cannot be selected at the same time.
The color-highlighted buttons shown in the figure at
left can learn the control signal from another device's
remote control.
÷
ER
PDPb040HD-Eng (97-105) 102 _ 7/24/03, 2:01 PM