Mitsubishi MELSEC F FX-40DU-E Handy Manual page 90

7. EDIT MODE
Editing Objects for lndividu
The range of posslble settlngs for each Item
IS
described below.
(a) POS. (display position)
Set coordinates for the display start position.
x-axis: Set a multiple of 8 with 0 as the reference
...
If a number whicn is not a multiple of 8 is set, it is automatically corrected by discarding
the remainder. Example: X:202
-
X:200
y-axis: 0 to 11 2
Note:
The maximum input value for the start coordinate i s determined b y the size set in
(2)
below. I f characters whose size i s too large are selected the message "SETTING IS
INCORRECT" will be displayed on attempting to register the object. Choose a setting
that will allow the characters to fit in the screen area.
(b) SIZE (character size)
Set the size of the characters to be displayed.
It is possible to set magnifications of x l to x4 in the vertical and horizontal directions.
A size setting changes the size of all the characters in a TEXT object. Therefore, if the size
of a single character is to be changed it must be registered in a separate object from other
characters.
Example:
AUTO MODE x2 (vertical and horizontal)
AUTO MODE
AUTO
MODE
This is
not
possible unless two
separate objects are registered.
(c) ATTR. (character attribute)
Set to determine whether the characters are displayed normally or highlighted.