Troubleshooting by Error Code
3.50 Inverter PCB Abnormality
Applicable
All outdoor unit models
Models
L1
Error Code
Method of Error
Detect current value during the output of waveform before compressor startup
Detection
Detect current value with the current sensor during synchronous operation for startup
Error Decision
When the overcurrent flows during the output of waveform
Conditions
When the current sensor error during synchronous operation
When IPM error occurs
Supposed
Inverter PCB
Causes
311
IPM failure
Current sensor failure
Drive circuit failure
SiUS341802EC
Part 6 Service Diagnosis