Troubleshooting; Service; Guarantee - Parkside PPFBSA 12 A1 Translation Of The Original Instructions

GB MT

Troubleshooting

The following table will assist you in fixing faults:
Problem
Device does not start
Engine is slowing down and
stops
Attachment tool does not
rotate smoothly, abnormal
noises can be heard
Device works with interrup-
tions

Service

Guarantee

Dear Customer,
This product is provided with a 5 year
guarantee from the date of purchase.
In case of defects, you have statutory
rights against the seller of the product.
These statutory rights are not restricted by
our guarantee presented below.
Terms of Guarantee
The guarantee period begins on the date
of purchase. Please retain the original re-
ceipt. This document is required as proof
of purchase.
If a material or manufacturing defect oc-
curs within five years of the date of pur-
chase of this product, we will repair or
replace – at our choice – the product
for you free of charge. This guarantee re-
quires the defective product and proof of
44
Possible cause
Rechargeable battery (18)
not inserted
On/Off switch (5) is broken contact the service centre.
Rechargeable battery (18)
discharged
Defective motor
Device is overloaded through
workpiece
Attachment tool defective
Internal loose contact
On/Off switch (5) is broken
purchase to be presented within the five-
year period with a brief written description
of what constitutes the defect and when it
occurred.
If the defect is covered by our guaran-
tee, you will receive either the repaired
product or a new product. No new guar-
antee period begins on repair or replace-
ment of the product.
Guarantee Period and Statutory
Claims for Defects
The guarantee period is not extended by
the guarantee service. This also applies
for replaced or repaired parts. Any dam-
ages and defects already present at the
time of purchase must be reported imme-
diately after unpacking. Repairs arising
after expiry of the guarantee period are
chargeable.
Error correction
Inserting the battery (Fig. C),
p. 42
Charging the battery,
p. 41
contact the service centre.
Reduce pressure on attach-
ment tool
Workpiece unsuitable
Change grinding disc
contact the service centre.