Maintenance; Storage; Troubleshooting - Parkside PSTKA 12 B3 Original Instructions Manual

GB
• Keep the ventilation slits, motor housing and
handles of the machine clean. Use a damp
cloth or brush to do this.

Maintenance

The device is maintenance free.

Storage

Always store the device and accessories:
• clean
• dry
• protected against dust

Troubleshooting

The following table will assist you in fixing faults:
Problem
Machine does not start
Machine works with interrup-
tions
Poor sawing performance
Saw blade quickly becomes
blunt
30
• In the case provided (25)
• out of the reach of children
The storage temperature for the rechargeable
battery and the device is between 0°C and
45°C. Avoid extreme cold or heat during stor-
age to ensure the battery output is not ad-
versely affected.
Remove the rechargeable battery from the
device before storing the device (see the sep-
arate operating instructions for the battery and
charger).
Possible cause
Rechargeable battery (28) not
inserted
On/Off switch (5) is broken
Rechargeable battery (28) dis-
charged
Defective motor
Internal loose contact
On/Off switch (5) is broken
Saw blade (16/17) unsuitable
for the workpiece to be pro-
cessed
Saw blade (16/17) blunt
Low battery power
Incorrect sawing speed
Saw blade (16/17) unsuitable
for the workpiece to be pro-
cessed
Too much pressure applied
Sawing speed too high
Error correction
Inserting the battery (Abb. G),
p. 29
contact the service centre.
Charge the battery (see the sep-
arate operating instructions for
the rechargeable battery and
charger)
contact the service centre.
contact the service centre.
contact the service centre.
Insert a suitable saw blade (16/
17)
Insert a new saw blade (16/
17)
Charge the battery (see the sep-
arate operating instructions for
the rechargeable battery and
charger)
Adjust sawing speed
Insert a suitable saw blade (16/
17)
Reduce the pressure
Reduce the sawing speed