Cleaning, Maintenance And Storage; Cleaning; Maintenance; Storage - Parkside PPFBSA 12 A1 Translation Of The Original Instructions

GB MT
• Always observe the safety information
in addition to the regulations and in-
formation about environmental protec-
tion (see Disposal/environmental pro-
tection, p. 26).
Cleaning, maintenance
and storage
WARNING! Risk of injury due to un-
intentional start-up. Protect yourself when
performing maintenance or cleaning work.
Switch off the device and remove the bat-
tery (1).
You should have any repair and mainten-
ance work that is not described in these
instructions carried out by our Service
Centre. Only use original replacement
parts.

Cleaning

Clean the rechargeable battery and char-
ger with a dry brush or dry cloth. Keep
the rechargeable battery and charger
away from moisture and sharp objects.

Maintenance

The device is maintenance free.

Storage

Always store the device and accessories:
• clean
• dry
• protected against dust
• out of the reach of children
The storage temperature for the re-
chargeable battery and the device is
between 0 °C and 45 °C. Avoid extreme
cold or heat during storage to ensure the
battery output is not adversely affected.
Remove the rechargeable battery from the
device before storing the device (see the
separate operating instructions for the bat-
tery and charger).
26
Wall mounting for charger
(optional)
You can also fix the charger (3) to the
wall.
Notes
• When drilling, be careful not to dam-
age any supply lines. Use suitable
search devices to find these or consult
an installation plan for guidance.
• Contact with electrical cables can lead
to electric shock and fire. Contact with
a gas line can result in an explosion.
• Damage to a water pipe can lead to
property damage and electric shock.
• Suitable diameter of screw head: 7-9
mm
Procedure
1. Using dowels, place two screws at the
desired position on a wall. Distance
between the screws: 54 mm
2. Leave the screw heads protruding from
the wall. Distance to the wall: ≈10 mm
3. Place the charger with the openings of
the wall bracket over the two screws
and pull it down as far as it will go.
Disposal/
environmental
protection
Remove the battery from the device and
recycle the device, battery, accessories
and packaging in an environmentally-
friendly manner.
Electrical devices must not be dis-
posed of with domestic waste.
The symbol of the crossed-out wheeled bin
means that this product must not be dis-
posed of as unsorted municipal waste at
the end of its useful life.