Parkside PPHSS 730 Operating And Safety Instructions Manual
Hide thumbs
Also See for PPHSS 730:
- Operation and safety notes (71 pages) ,
- Operating and safety instructions manual (39 pages) ,
- Manual (43 pages)
Table of Contents
Advertisement
Quick Links
70 mm
65 mm
30 mm
110 mm
10 mm
ø 30 mm
260 mm
150 mm
205 mm
Kompernaß GmbH
Burgstraße 21
44867 Bochum (Germany)
Last Information Update:
03 / 2008 · Ident.-No.: PPHSS 730032008-6
JIG SAW
PPHSS 730
jig saw
Operation and Safety Notes
Before reading, unfold both pages containing illustrations and familiarise yourself with all functions of
the device.
GB / IE / CY
Operating and safety instructions
Page
5
Advertisement
Table of Contents
Related Manuals for Parkside PPHSS 730
Summary of Contents for Parkside PPHSS 730
- Page 1 JIG SAW 70 mm 65 mm 30 mm Before reading, unfold both pages containing illustrations and familiarise yourself with all functions of 110 mm 10 mm the device. ø 30 mm 260 mm 150 mm 205 mm PPHSS 730 jig saw...
- Page 2 You need: 1 x 395 mm x 185 mm x 10 mm 2 x 395 mm x 120 mm x 10 mm 2 x 260 mm x 205 mm x 10 mm 1 x ø 30 mm x 400 mm...
-
Page 3: Table Of Contents
Workplace safety ......................Page 7 Electrical safety ......................Page 8 Personal safety ......................Page 8 Careful handling and use of electrical power tools ..........Page 9 Safety advice relating specifically to this device ............Page 9 Original accessories / attachments ................Page 10 Preparing for use Information about saw blades ..................Page 10... -
Page 4: Introduction
Introduction The following icons / symbols are used in this instruction manual: Read instruction manual! Safety class II Wear hearing protection, dust Observe caution and safety notes! protection mask, protective glasses and protective gloves. Caution – electric shock! Keep children and other unauthorised Dangerous electric current –... -
Page 5: Included Items
1 “Warranty and service” booklet account the intervening periods of time when the device is switched off or is running but is not actual- ly in use. This can result in a much lower vibration load over the whole of the period of working. -
Page 6: Electrical Safety
Accidents can happen if you carry There is an increased risk of electric shock if the device with your finger on the On / OFF your body is earthed. switch or with the device switched on. -
Page 7: Careful Handling And Use Of Electrical Power Tools
Safety advice relating taking. By using the right electrical power specifically to this device tool for the job you will work more safely and achieve a better result. b) Do not use an electrical power tool if avoiding the danger of injury, fire and its switch is defective. -
Page 8: Original Accessories / Attachments
General safety advice for electrical power tools / Preparing for use Note: Use a suitable coolant, e.g. cutting oil. This After switching off do not brake the saw blade by pressing it sideways against an object. improves the endurance and increases the service... -
Page 9: Attaching The Guide Fence
(left / right) on the base plate . The embossed 230 V ~ 50 Hz and is fitted with a 16 A fuse or marking for each recessed line indicates the cut-out in accordance with the regulations! cutting angle setting. -
Page 10: Maintenance And Cleaning
Information Service centre The service centre for your country is shown in the warranty documentation. Have your device repaired only by We reserve the right to make technical modifications in the course qualified specialist personnel using of product development. GB/IE/CY...