6. Open locking handle and insert
empty capsule holder. Close locking
handle again.
7. Place empty container under outlet.
10. Move lever to the right.
11. Machine descales in startstop oper
ation for approx. 2 min.
13. Refill water tank with used descaling
solution out of the container.
14. Insert water tank and place empty
container under outlet.
M A I N T E N A N C E
8. Set bar display to maximum level.
Press and hold power button for at
least 5 seconds.
9. Power button starts blinking green
and machine enters the descaling
mode.
12. Wait until the lever comes back to the
middle position. The power button
blinks green for 2 minutes at the end
of descaling.
15. Set bar display to maximum level.
Press and hold power button for at
least 5 seconds.
16. Power button starts blinking green
and machine enters the descaling
mode.
Service manual
59