Empty fluid system for shipping
1. Empty water tank and drip tray.
4. Place a jug under outlet.
5. Set volume selector to minimum
level.
6. Push selector lever to the left.
9. Switch on machine and push
selector lever to the right.
10. After detecting no more water flow,
the machine switches to error mode.
2. Check that capsule holder is empty.
3. Reinstall capsule holder.
7. After detecting no more water flow,
the machine switches to error mode.
8. Switch off machine.
11. Switch off machine.
12. Remove and empty jug.
13. Clean machine and all accessories
with a soft damp cloth. Use only
clean cleaning tools.
O P E R A T I N G
Service manual
17