3. Insert capsule holder in machine and
close locking handle.
6. Connect Tconnector (A) to tube of
dummy capsule (B).
F I N A L T E S T I N G
Test device assembly
4. Connect Tconnector (B) and pres
sure control valve (D) with a flexible
tube piece (C, approx. 25 mm long)
according to illustration.
5. Connect pressure gauge tube (A) to
Tconnector (B).
7. Place a graduated recipient under
test device.
8. Ensure that a precise electronic ther
mometer is available. Adjust elec
tronic thermometer if necessary.
End of test device assembly.
Service manual
51