Advertisement
CAMSHAFT
CAUTION:
If crankshaft
is turned without drawing the
camshaft
drive chain upward,
the chain will
be caught between
crankcase and cam chain
drive sprocket.
NOTE:
Apply grease on the cam sprocket locating pin
and install the pin into the camshaft.
e@ Engage the chain on the cam sprocket with the
locating pin hole @ at one o'clock position.
NOTE:
Do not rotate the magneto rotor while doing
this.
When
the
sprocket
is not
positioned
correctly, turn the sprocket. When
installing
the
camshaft
into
the
cam
sprocket,
pay
attention not to dislodge the locating pin or it
may fall into the crankcase.
@ Install the C-ring
into the ring groove
of the
cylinder head.
@ Fit the lock washer @) so that it is covering the
locating pin. 12747
-
44 C00
e Apply THREAD
LOCK
SUPER
"1303" to the
bolts and tighten them.
14-—16N.m
Tightening torque
( 1.4 — 1.6 kg-m
)
'10.0 — 11.5 lb-ft /
Advertisement
