Advertisement
e After
installing the countershaft assembly and
driveshaft
assembly
into
the
right
crankcase,
fit the
gearshift
forks (),@)and @)into
the
gearshift fork grooves.
(@ For Top driven gear (No. 1)
(2) For 4th driven gear (No. 2)
@) For 3rd drive gear (No. 3)
NOTE:
Three kinds of gearshift forks, (1), @)and @)
are
used.
They
resemble
each
other
very
closely in external appearance and configura-
tion.
Carefully examine the illustration for correct
installing positions and directions.
© Position the gearshift cam
as shown
in Fig. so
that the gearshift fork shafts can
be installed
easily.
When replacing the gearshift cam stopper bolt
@® , apply
a small
quantity
of THREAD
LOCK
"1342"
to the threaded
part of the
bolt.
e After
installing
the gearshift fork shafts, hook
the gearshift cam stopper spring.
NOTE:
After
installing
the
gearshift
cam
stopper
spring,
install
the neutral
switch.
(See page
3-18)
SERVICING ENGINE
3-48
Advertisement
