Advertisement
3-53 SERVICING ENGINE
@ Hook the tensioner spring onto the hooked part
of crankcase.
@ Tighten the two bolts ( to the specified torque,
and
then
tighten the stopper
bolt @ and lock
nut @.
15 —20N-m
1.5 — 2.0 kg-m
)
11.0 — 14.5 Ib-ft /
Tightening torque
(Bolts @ )
MAGNETO
e Fit the key in the key slot on the crankshaft,
then install the magneto rotor.
e@ Apply
a small
quantity
of THREAD
LOCK
SUPER
'1305"
to the threaded
part of rotor
bolt.
® Tighten the magneto rotor bolt to the specified
torque
by using the
special
tool
and
torque
wrench.
99000-32100
Thread lock super ''1305"
09930-44912
Rotor holder
110 — 130 N.m
Tightening torque
11.0 — 13.0 kg-m
79.5 — 94.0 Ib-ft
NOTE:
Advertisement
