Advertisement
6-43 CHASSIS
e@ Apply grease to the bearings, spacers and dust
seals.
Tightening
torque
40 —60N-m
( 4.0 —6.0 kg-m )
29.0 — 43.5 Ib-ft
Install the bearings so
that the stamped mark
side should face out-
wards.
Apply grease ''A'' to the dust seal lip
Apply grease
''A" to the both surfaces of washer
***
Apply grease ''A'' to the bearing and outside of
Tightening torque
Install the bearing to
the center of the
cushion rod
Advertisement
