Advertisement
6-3 CHASSIS
SPOKE NIPPLE
Check
to be sure
that all nipples
are tight, and
retighten them as necessary using special tool.
4—5N-m
DISASSEMBLY
e@ Drive out the wheel
hub bearings by using the
special tool in the following procedures.
@ Insert the adapter into the wheel hub bearing.
e After inserting the wedge
bar from the oppo-
site side, lock the wedge bar in the slit of the
adapter.
@ Drive out the wheel hub bearing by knocking
the wedge bar.
CAUTION:
The removed bearing should be replaced.
Advertisement
