Advertisement
CYLINDER HEAD SERVICING
CAUTION:
Be sure to identify each removed
part as to
its location, and lay the parts out in groups
designated as 'Exhaust', 'Inlet', so that each
will be restored to the original location during
assembly
e@ Pull out the manual and automatic de-compres-
sion shafts.
®
@)
@® Automatic de-compresshin shaft
@ Manual de-compression shaft
|
e@ Remove the de-compression cable bracket @) by
removing
the
bolt,
then
remove
the
intake
rocker arm shaft set bolt @.
@ Remove
the exhaust rocker arm shaft set bolt
©.
Advertisement
