Advertisement
3-17 SERVICING ENGINE
e@ Remove
the idle gear and oi! pump driven gear
by removing the circlips.
e@ Remove
the oil pump mounting screws with an
impact driver.
09900-06107
Snap ring pliers
e
Remove
the oil sump
filter cap and oil sump
filter by removing the bolts and screws.
e@ Remove the crankcase securing bolts.
© Separate
the crankcase
into 2 parts, right and
left with a crankcase separating tool.
09920-13120
Crankcase separating tool
i
7
NOTE:
Fit the crankcase separating tool, so that the
tool plate is parallel with the end face of the
crankcase.
CAUTION:
The crankshaft and transmission components
must remain in the right crankcase half. This
is necessary because the gearshift cam stopper
is mounted
on the right crankcase half and
will be damaged
if the transmission compo-
|_Nents remain in the left half.
Advertisement
