Suzuki DR600S Service Manual page 85

3-51 SERVICING ENGINE
BALANCER
e Fit the key @ in the key slot on the crankshaft,
then install the balancer drive sprocket (2), wave
washer (8) and ring nut @).
@ Tighten the ring nut to the specified torque by
using the special tools and torque wrench.
09917-23711
09910-20116
Ring nut socket wrench
Conrod holder
25 — 35 N-m
NOTE:
Front and rear balancer driven sprockets are
identified with the letters of "F" or "R".
25—40N-m
Tightening torque
( 2.5 — 4.0 kg-m
)
18.0 — 29.0 Ib-ft