The following table describes the fields in this screen.
Table 153 Maintenance > Remote Management > Trust Domain
LABEL
Add Trust
Domain
IP Address
Delete
35.4 The Add Trust Domain Screen
Use this screen to configure a public IP address which is allowed to access the Zyxel Device. Click the
Add Trust Domain button in the Maintenance > Remote Management > Trust Domain screen to open the
following screen.
Figure 221 Maintenance > Remote Management > Trust Domain > Add Trust Domain
The following table describes the fields in this screen.
Table 154 Maintenance > Remote Management > Trust Domain > Add Trust Domain
LABEL
IP Address
OK
Cancel
Chapter 35 Remote Management
DESCRIPTION
Click this to add a trusted host IP address.
This field shows a trusted host IP address.
Click the Delete icon to remove the trust IP address.
DESCRIPTION
Enter a public IPv4 IP address which is allowed to access the service on the Zyxel Device from
the WAN.
Click OK to save your changes back to the Zyxel Device.
Click Cancel to restore your previously saved settings.
VMG/XMG Series User's Guide
347