Table of Contents
Advertisement
29.3 The MLD Status Screen
Use this screen to look at the current list of multicast groups the Zyxel Device manages through MLD.
Configure MLD in Network Setting > IGMP/MLD. To open this screen, click System Monitor > Multicast
Status > MLD Status.
Figure 212 System Monitor > Multicast Status > MLD Status
The following table describes the labels in this screen.
Table 145 System Monitor > Multicast Status > MLD Status
LABEL
Refresh
Interface
Multicast Group
Filter Mode
Source List
Member
Chapter 29 Multicast Status
DESCRIPTION
Click this button to update the status on this screen.
This field displays the name of an interface on the Zyxel Device that belongs to an MLD multicast
group.
This field displays the name of the MLD multicast group to which the interface belongs.
INCLUDE means that only the IP addresses in the Source List get to receive the multicast group's
traffic.
EXCLUDE means that the IP addresses in the Source List are not allowed to receive the multicast
group's traffic but other IP addresses can.
This is the list of IP addresses that are allowed or not allowed to receive the multicast group's
traffic depending on the filter mode.
This is the list of members in the multicast group.
VMG/XMG Series User's Guide
334
Advertisement
Table of Contents
