ZyXEL Communications XMG Series User Manual page 60

Table 19 Navigation Panel Summary (continued)
LINK TAB
NAT Port Forwarding
Port Triggering
DMZ
ALG
Address Mapping Use this screen to change your Zyxel Device's address mapping settings.
Sessions
DNS DNS Entry
Dynamic DNS
IGMP/MLD IGMP/MLD
Vlan Group Vlan Group
Interface Interface
Grouping
Grouping
USB Service File Sharing
Media Server
Home Home
Connectivity
Connectivity
Security
Firewall General
Protocol
Access Control
DoS
MAC Filter MAC Filter
Parental Parental Control
Control
Scheduler Rule Scheduler Rule
Certificates Local Certificates
Trusted CA
VoIP
SIP SIP Account
SIP Service
Provider
Phone Phone Device
Region
Call Rule Call Rule
Chapter 2 The Web Configurator
FUNCTION
Use this screen to make your local servers visible to the outside world.
Use this screen to change your Zyxel Device's port triggering settings.
Use this screen to configure a default server which receives packets from
ports that are not specified in the Port Forwarding screen.
Use this screen to enable or disable SIP ALG.
Use this screen to configure the maximum number of NAT sessions each
client host is allowed to have through the Zyxel Device.
Use this screen to view and configure DNS routes.
Use this screen to allow a static hostname alias for a dynamic IP address.
Use this screen to configure multicast settings (IGMP for IPv4 and MLD for
IPv6 multicast groups) on the WAN.
Use this screen to group and tag VLAN IDs to outgoing traffic from the
specified interface.
Use this screen to map a port to a PVC or bridge group.
Use this screen to enable file sharing via the Zyxel Device.
Use this screen to use the Zyxel Device as a media server.
Use this screen to enable or disable WiFi auto-configuration.
Use this screen to configure the security level of your firewall.
Use this screen to add Internet services and configure firewall rules.
Use this screen to enable specific traffic directions for network services.
Use this screen to activate protection against Denial of Service (DoS)
attacks.
Use this screen to block or allow traffic from devices of certain MAC
addresses to the Zyxel Device.
Use this screen to block web sites with the specific URL.
Use this screen to configure the days and times when a configured
restriction (such as parental control) is enforced.
Use this screen to view a summary list of certificates and manage
certificates and certification requests.
Use this screen to view and manage the list of the trusted CAs.
Use this screen to set up information about your SIP account and
configure audio settings such as volume levels for the phones
connected to the Zyxel Device.
Use this screen to configure the SIP server information, QoS for VoIP calls,
the numbers for certain phone functions, and dialing plan.
Use this screen to select your location and a call service mode.
Use this screen to select your location and a call service mode.
Use this screen to configure speed dial for SIP phone numbers that you
call often.
VMG/XMG Series User's Guide
60