Table of Contents
Advertisement
Table 150 Maintenance > User Account (continued)
LABEL
Lock Period
Group
Modify
Cancel
Apply
34.2.1 The User Account Add/Edit Screen
Click Add New Account or the Edit icon of an existing account in the Maintenance > User Account to
open the following screen.
Figure 218 Maintenance > User Account > Add/Edit
The following table describes the labels in this screen.
Table 151 Maintenance > User Account > Add/Edit
LABEL
Active
User Name
Password
Verify New
Password
Retry Times
Chapter 34 User Account
DESCRIPTION
This field displays the length of time a user must wait before attempting to log in again after a
number if consecutive wrong passwords have been entered as defined in Retry Times.
This field displays whether this user has Administrator or User privileges.
Click the Edit icon to configure the entry.
Click the Delete icon to remove the entry.
Click Cancel to restore your previously saved settings.
Click Apply to save your changes.
DESCRIPTION
Select Enable or Disable to activate or deactivate the user account.
Enter a new name for the account. This field displays the name of an existing account.
Type your new system password (up to 256 characters). Note that as you type a password, the
screen displays a (*) for each character you type. After you change the password, use the new
password to access the Zyxel Device.
Type the new password again for confirmation.
Enter the number of times consecutive wrong passwords can be entered for this account. 0
means there is no limit.
VMG/XMG Series User's Guide
343
Advertisement
Table of Contents
