ZyXEL Communications XMG Series User Manual page 38

Table 8 VMG3925-B10C LED Descriptions (continued)
LED COLOR
USB Green
Table 9 XMG3927-B50A/VMG3625-T50A/VMG3927-BX0A/VMG8825-BX0A LED Descriptions
LED COLOR
POWER Blue
Red
WAN Blue
INTERNET Blue
Red
ETHERNET1~4 Blue
2.4G WLAN/ Blue
WPS
Amber
5G WLAN/ Blue
WPS
Amber
Chapter 1 Introducing the Zyxel Device
STATUS DESCRIPTION
On The Zyxel Device recognizes a USB connection through the USB slot.
Blinking The Zyxel Device is sending/receiving data to/from the USB device
connected to it.
Off The Zyxel Device does not detect a USB connection through the USB slot.
STATUS DESCRIPTION
On The Zyxel Device is receiving power and ready for use.
Blinking The Zyxel Device is self-testing.
On The Zyxel Device detected an error while self-testing, or there is a device
malfunction.
Blinking The Zyxel Device is uploading firmware.
Off The Zyxel Device is not receiving power.
On One of the following connections is up.
• ADSL
• G.fast
• VDSL
• Ethernet connection on the WAN.
Blinking The ADSL/G.fast/VDSL link is down, and the Zyxel Device is looking for an
(slow) ADSL/G.fast/VDSL link.
Blinking The Zyxel Device is initializing the ADSL/G.fast/VDSL link.
(fast)
Off There is no Ethernet connection on the WAN.
On Your device has a WAN IP address (either static or assigned by a DHCP
server), PPP negotiation was successfully completed (if used) and the DSL
connection is up.
Blinking The Zyxel Device is sending or receiving IP traffic.
Off There is no Internet connection or the gateway is in bridged mode.
On The Zyxel Device attempted to make an IP connection but failed. Possible
causes are no response from a DHCP server, no PPPoE response, PPPoE
authentication failed.
On The Zyxel Device has a successful 10/100/1000 Mbps Ethernet connection
with a device on the Local Area Network (LAN).
Blinking The Zyxel Device is sending or receiving data to/from the LAN at 10/100/
1000 Mbps.
Off The Zyxel Device does not have an Ethernet connection with the LAN.
On The 2.4 GHz wireless network is activated.
Blinking The Zyxel Device is communicating with 2.4 GHz wireless clients.
Blinking The Zyxel Device is setting up a WPS connection with a 2.4 GHz wireless
client.
Off The 2.4 GHz wireless network is not activated.
On The 5 GHz wireless network is activated.
Blinking The Zyxel Device is communicating with 5 GHz wireless clients.
Blinking The Zyxel Device is setting up a WPS connection with a 5 GHz wireless client.
Off The 5 GHz wireless network is not activated.
VMG/XMG Series User's Guide
38