ZyXEL Communications XMG Series User Manual page 39

Table 10 VMG8823-BX0B LED Descriptions
LED COLOR
Power Green
Red
DSL Green
Orange
Internet Green
Red
WAN Green
LAN1~4 Green
WLAN/WPS Green
Amber
Chapter 1 Introducing the Zyxel Device
STATUS DESCRIPTION
On The Zyxel Device is receiving power and ready for use.
Blinking The Zyxel Device is self-testing.
On The Zyxel Device detected an error while self-testing, or there is a device
malfunction.
Blinking The Zyxel Device is upgrading firmware.
Off The Zyxel Device is not receiving power.
On The VDSL line is up.
Slow The Zyxel Device is detecting carrier signals.
Blinking
Fast The Zyxel Device is initializing the VDSL line.
Blinking
On The ADSL line is up.
Slow The Zyxel Device is detecting carrier signals.
Blinking
Fast The Zyxel Device is initializing the ADSL line.
Blinking
Off The DSL line is down.
On The Zyxel Device has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a DHCP
server), PPP negotiation was successfully completed (if used) and the DSL
connection is up.
Blinking The Zyxel Device is sending or receiving IP traffic.
Off There is no Internet connection or the gateway is in bridged mode.
On The Zyxel Device attempted to make an IP connection but failed. Possible
causes are no response from a DHCP server, no PPPoE response, PPPoE
authentication failed.
On The Zyxel Device has a successful 10/100/1000 Mbps Ethernet connection
on the WAN.
Blinking The Zyxel Device is sending or receiving data to/from the WAN at 10/100/
1000 Mbps.
Off There is no Ethernet connection on the WAN.
On The Zyxel Device has a successful 10/100/1000 Mbps Ethernet connection
with a device on the Local Area Network (LAN).
Blinking The Zyxel Device is sending or receiving data to/from the LAN at 10/100/
1000 Mbps.
Off The Zyxel Device does not have an Ethernet connection with the LAN.
On The 2.4 GHz or 5 GHz wireless network is activated.
Blinking The Zyxel Device is communicating with 2.4 GHz or 5 GHz wireless clients.
Blinking The Zyxel Device is setting up a WPS connection with a 2.4 GHz or 5 GHz
wireless client.
Off The 2.4 GHz or 5 GHz wireless network is not activated.
VMG/XMG Series User's Guide
39