ZyXEL Communications XMG Series User Manual page 131

Figure 81 Network > Broadband > Cellular Backup (Budget Setup)
The following table describes the labels in this screen.
Table 33 Network Setting > Broadband > Cellular Backup
LABEL DESCRIPTION
General
Cellular Backup Click this switch to have the Zyxel Device use the cellular connection as your WAN or a backup
when the wired WAN connection fails. When the switch goes to the right
enabled. Otherwise, it's not.
Ping Check Click this switch to ping check the connection status of your WAN. When the switch goes to the
right
You can configure the frequency of the ping check and number of consecutive failures before
triggering cellular backup.
Check Cycle Enter the frequency of the ping check in this field.
Consecutive Fail Enter how many consecutive failures are required before cellular backup is triggered.
Chapter 6 Broadband
, the function is enabled. Otherwise, it's not.
VMG/XMG Series User's Guide
131
, the function is