The Sip Service Provider Screen - ZyXEL Communications XMG Series User Manual

Hide thumbs Also See for XMG Series:
Table of Contents

Advertisement

Table 120 VoIP > SIP > SIP Account > Add new account/Edit (continued)
LABEL
Warm Line Timer
Enable Missed Call
Email Notification
Mail Account
Send
Notification to
Email
Missed Call
Email Title
Early Media
IVR Play Index
Music On Hold
(MOH)
IVR Play Index
Cancel
OK

23.4 The SIP Service Provider Screen

Use this screen to view the SIP service provider information on the Zyxel Device. A SIP provider offers
Internet call services using VoIP technology. You may need to consult your SIP service provider for the
following settings. Click VoIP > SIP > SIP Service Provider to open the following screen.
Figure 190 VoIP > SIP > SIP Service Provider
Each field is described in the following table.
Table 121 VoIP > SIP > SIP Service Provider
LABEL
Add New Provider
#
Chapter 23 Voice
DESCRIPTION
Enter a number of seconds that the Zyxel Device waits before dialing the warm line
number if you pick up the telephone and do not press any keys on the keypad.
Select this option to have the Zyxel Device email you a notification when there is a
missed call.
Select a mail account for the email address specified below. If you select None
here, email notifications will not be sent via email.
You must have configured a mail account already in the Email Notification screen.
Notifications are sent to the email address specified in this field. If this field is left
blank, notifications will not be sent via email.
Type a title that you want to be in the subject line of the email notifications that the
Zyxel Device sends.
Select this if you want people to hear a customized recording when they call you.
Select the tone you want people to hear when they call you.
This field is configurable only when you select Early Media. See
page 306
for information on how to record these tones.
Select this to play a customized recording when you put people on hold.
Select the tone to play when you put someone on hold.
This field is configurable only when you select Music on Hold, See
page 306
for information on how to record these tones.
Click this to set every field in this screen to its last-saved value.
Click this to save your changes and to apply them to the Zyxel Device.
DESCRIPTION
Click this button to add a new SIP service provider.
This is the index number of the entry.
VMG/XMG Series User's Guide
295
Section 23.10 on
Section 23.10 on

Advertisement

Table of Contents
loading

Table of Contents