Table of Contents
Advertisement
Table 30 Network Setting > Broadband > Add/Edit New WAN Interface (Routing Mode)
LABEL
Obtain IPv6 DNS
Info
Automatically
Use Following
Static IPv6 DNS
Address
Primary DNS
Server
Secondary DNS
Server
IPv6 Routing Feature (This is available only when you select IPv4 IPv6 DualStack or IPv6 Only in the IPv4/IPv6 Mode
field. You can enable IPv6 routing features in the following section.)
MLD Proxy
Enable
Apply as Default
Gateway
DS-Lite
DS-Lite Relay
Server IP
6RD
Service Provider
IPv6 Prefix
IPv4 Mask
Length
Border Relay
IPv4 Address
Cancel
Apply
6.2.1.2 Bridge Mode
Click the Add new WAN Interface in the Network Setting > Broadband screen or the Edit icon next to the
connection you want to configure. Select Bridge as the encapsulation mode. The screen varies
depending on the interface type you select.
If you select ADSL/VDSL over PTM or Ethernet as the interface type, the following screen appears.
Chapter 6 Broadband
DESCRIPTION
Select Obtain IPv6 DNS Info Automatically to have the Zyxel Device get the IPv6 DNS server
addresses from the ISP automatically.
Select Use Following Static IPv6 DNS Address to have the Zyxel Device use the IPv6 DNS server
addresses you configure manually.
Enter the first IPv6 DNS server address assigned by the ISP.
Enter the second IPv6 DNS server address assigned by the ISP.
Select this check box to have the Zyxel Device act as an MLD proxy on this connection. This
allows the Zyxel Device to get subscription information and maintain a joined member list for
each multicast group. It can reduce multicast traffic significantly.
Select this option to have the Zyxel Device use the WAN interface of this connection as the
system default gateway.
This is available only when you select IPv6 Only in the IPv4/IPv6 Mode field. Enable Dual Stack
Lite to let local computers use IPv4 through an ISP's IPv6 network. See
118
for more information.
Click this switch to let local computers use IPv4 through an ISP's IPv6 network. When the switch
goes to the right
, the function is enabled. Otherwise, it's not.
Specify the transition router's IPv6 address.
The 6RD (IPv6 rapid deployment) fields display when you set the IPv6/IPv4 Mode field to IPv4
Only. See
IPv6 Rapid Deployment on page 117
Click this switch to tunnel IPv6 traffic from the local network through the ISP's IPv4 network. When
the switch goes to the right
Select Manually Configured if you have the IPv4 address of the relay server. Otherwise, select
Automatically configured by DHCPC to have the Zyxel Device detect it automatically through
DHCP.
The Automatically configured by DHCPC option is configurable only when you set the method of
encapsulation to IPoE.
Enter an IPv6 prefix for tunneling IPv6 traffic to the ISP's border relay router and connecting to the
native IPv6 Internet.
Enter the subnet mask number (1~32) for the IPv4 network.
When you select Manually Configured, specify the relay server's IPv4 address in this field.
Click Cancel to exit this screen without saving.
Click Apply to save your changes.
VMG/XMG Series User's Guide
for more information.
, the function is enabled. Otherwise, it's not.
125
Dual Stack Lite on page
Advertisement
Table of Contents
